4" High Temperature Glue Sticks for cooler climates (package of 12).
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Dent Out Glue Sticks "Cool Climate Glue" Refills. 4 Inch Size
PU7050 Features: -Baby tram gauge hard with case. -Indispensible for determining collision damage to unibody cars. -For checking critical measurements during repair. -Use the tram to check dimensions between control points on suspension and mechanical components. -Tram Instrument makes it easy to establish dimensions around components. -Check contours by comparing measurements from one side of the vehicle to the other. -Level bubble installed in sliding head for accuracy in measurement. -Includes hard plastic storage case: 7 lbs. -Weight: 11 lbs. -Measures from 2 1/2" to 7".
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
'MRT158G
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Martin Tools (MRT158G) Point Finishing Hammer with Hickory Handle
LC20720 Features: -Maximum welding capacity: 20 gauge Autobody steel. Specifications: -Primary voltage: 208/230 single phase 60/50 Hz.-Line fuse: 30 AMP.-Power input cable: 25 , No. 12/3 wire.-230 Volt Portable Dent Puller. Assembly Instructions: -Cable assembly length: 7 ground, 7 power. Dimensions: -Size: 11-1/2''H X 15''W x 16-3/4''L.-Weight: 64 lbs. (29 kg). Warranty: -30 day warranty on material and workmanship.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
OTC Body and Fender Dent Puller Often the biggest time-consuming part of dent removal is the removal and installation of interior panels and upholstery. This tool eliminates those steps. Simply drill a hole at the base of the dent and thread in the tool's self-tapping screw. A few sharp blows of the slide hammer will pull the dent out. The puller is 17 inch long with Pyralin handle grip. It is a replaceable self-tapping screw. It comes with instructions included.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Mo-Flex slings are extremely flexible to conform more easily to the curve of surfaces being pulled. The protective pad slips around the sling to provide protection to the sling when wrapped around sharp objects. The overall length is 60", width is 2" and it weighs 2 lbs. Vertical capacity: 5,300 lbs. Choke Capacity: 4,200 lbs. Basket Capacity: 10,600 lbs. This product is made in the U.S.A.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Hammer and dolly set contains everything you need for basic body work. Carbon steel hammer heads and dollies for lasting service life and durability. Hammers feature hardwood handles. Used for pounding auto sheet metal before finishing, you can use them on flat and curved surfaces. Includes 3 hammers and 4 dollies.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
The bumper tree is perfect for all of your bumper needs. It allows you to easily work on, prepare and paint bumpers, spoilers and fenders. The included casters let you move the bumper/fender around the shop as needed.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
This 18" Bag Dolly is an excellent tool for forming sheet metal.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Delrin Cone & Pointer New large Delrin Cone fits over end of Pointer and allows exact middle-of-the-hole measuring. Pointer can be used independent of cone. Fits all Mo-Clamp TRAM gauges. Made in the U.S.A.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Stud Welder Draw Pins: 2.5 mm, Qty. 500.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Fast and easy to use.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Lots of assorted dent glue pulling tabs for lots of hail dents. You can glue on several tabs and after glue cures you can remove one after another after another. Better yet is you'll have tabs for creases, pressure dents, hail damage and door dings.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
This reflector board comes complete with goose neck and suction cup. It produces a fogged reflection for superior finishing during mobile applications. Ideal for working in outside conditions without power
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Get a Stud welder and pulling system that is an extension of your body. It's like having sticky fingers and being able to pull dents with your hand.
More Versitle and than Faster Than Stud Guns!
Will weld: weld pins, weld a slide hammer directly to the panel, weld a light pulling rod, weld wiggle wire for crease pulling, shrink
Heavy duty 110 volt unit made for extended use
Includes Pin/ washer tip, Wiggle wire tip, 1 pound wiggle wire, shrink tip, 3 finger claw, slide hammer rod & weight, short pull rod, leverage puller and ground magnet
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Complete set of heavy duty dent pulling tools incorporates a pro glue gun, 2 types of super sized bonding adhesives, 10 t-pullers, 5 small & 5 big pull nibs, cone cross bar and tripod puller and special release agent into a strong, plastic carrying case. Turn parking lot door dings, shopping cart dents, minor creases, hail stone damage, damage from golf balls, baseballs and stones, dents caused by objects shifting in the trunk into a profit center. The Bridge System offers two different adhesives allowing you to select for shallow dents and depressions or a high tack adhesive for deeper depression, higher ambient temperatures or higher humidity. Use only on OEM baked finishes. Will not damage factory finish. No need to access the underside of the panel. You have enough supplies to start your own dent and ding repair business. Big Profits $$ Low Overhead!
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
DFPK100 The ultimate paintless glue pulling system includes everything you need to pull rounded dings and dents from car panels. This kit does not require training to use, it is simple and straight forward. Glue and pull with the specialized pulling devices. Double wall panels, whenever access to the back of the panel is impossible, this kit is your only solution for paintless repair. The glue is easily removed using rubbing alcohol. Glue does not damage OEM paint. When used in conjunction with the PDR rods you will be able to repair all hail and parking lot dings. The complete kits includes 5 small, 5 large T-pullers, an assortment of different size and shaped pulling nibs, cone, bar and tri-pod pullers, 10 sticks high strength glue, heavy duty glue gun and storage case. Features: -Complete professional glue pulling kit. -For paintless dent repair (PDR).
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Lifting capacity 50kg. Ideal as a small dent puller. Can also be used to carry glass or heavy sheets metals. Manufactured from Aluminium alloy packaged in a cardboard box
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
HSADK1000 Features: -Works great to restore body lines.-Works with all UNI-SPOTTER stud welders.-Quick & easy to use.-Lightweight and portable for out-of-position pulls.-Dent Killer - Dent Puller Attachment.-Repair only up to 1 yr.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Pulls rear quarter and wheel well hooks above the lip of the wheel opening.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Bondo Shaping & Bumping Hammer is used to make small folds and remove small dents in sheet metal.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Straighten Metal With Accuracy
The accuracy, speed and ease of operation of a Bullseye Pick produces quality work faster than conventional methods. Designed for angle picking around braces, gussets or other hard-to-reach places. You know exactly where the pick will strike so your work is precise. The site does not have to be flat on the surface to work, just tilt it to any angle needed to clear an underside brace and you will still get excellent results. Designed to return to open position when released. All metal parts. Use the optional blunt tip (Sold Separately) for bumping metal.
Kit Includes:
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
These hole plugs are designed with multiple locks to positively snap into panel.Excellent for paintless dent repair. Made of heat stabilized nylon (UL94V2) and suitable for elevated temperatures.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
This Amazing Kit Repairs Dents and Dings Without Hurting Your Vehicle's Finish!
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
The Martin Hammer & Dolly Door Skin Finishing Kit is specially designed for final finishing on door skins and flanges.The kit includes a Martin Door Skin Hammer and a thick rubber-coated heel dolly that allows you to control and cushion the effect of completing skins and flanges. Made in USA.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
This PDR Tool Package is perfect for the body shop or individual looking to get started in the Paintless Dent Repair business.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
The Grand Daddy Hail & Paintless Dent Repair Kit for Door Dings, Hail Repair and Dent Removal
Get a great looking repair with minimal filler use!
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Nylon strap with ring, fits between the roof and door frame to create leverage point when working on the roof.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
KECO Tabs for professional Paintless Daint Repair - made in USA.
The amount of pull capacity of a tab is in part directly related to the surface area on a tab. All tabs have a design on the face, many are focused on a marketing design and sacrifice the ability to easily remove glue after use, Keco's golf ball dimple design allows for maximum surface area without sacrificing the ability to remove the glue after use.
Keco chose to make the thickest shaft possible while still fitting 98% of the "lifters" and "slide hammers" on the market today. These tabs also feature a ribbed adapter piece for easily gripping the tab while removing glue.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
This unit is used by professionals who want quality, reliability and a no-hassle warranty. The model 9000 has the most powerful transformer in the industry and will operate effeciently in all kinds of high demand situiations such as multiple users on long extension cords. The 9000's transformer is so powerful it has been tested to produce 10 million welds. All Uni-Spotter welders are 110 volt and come with a built in overload relay to protect the transformer from overheating.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
This is a Paintless Dent Repair Slide Hammer. No Painting is Required When Using This Tool.
This Is A Great Tool For Removing All Types of Dents in Trucks and Cars. Great for Removing Hail in Airplanes as well.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Capacity of 100kg. Also suitable for carrying awkward heavy items such as windows useful dent puller with twin suction cup
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
1/2" Nylon punch with sharp tip, used to knock down high spots, while minimizing the risk of marring the surface.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Heavy Pull Studs
Stud Welding Tip
Mold Rivets
Shrink Tip
5 YEAR WARRANTY
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
The Junior Versa Hook is designed smaller to allow bodymen to get into tighter areas. End is only 1 3/4" wide for pulling on rocker panels, door posts, etc. The back lip is used for a tie - down to secure the vehicle during pulls. The narrow width permits use on frame racks with smaller slots. Designed for use with 3/8" chain. Gripping surface: 1 3/4" wide (45 mm), 1" deep (25 mm). Overall length: 9" (228 mm). Weight: 5 lbs. (2.27 kg). Capacity: 6 tons (5,443 kg).
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Alloy heat - treated hooks increase pulling options. May be used with Hole Pull Plates to pull, or use in combination with clamps. Weight approximately 2 lbs. each (.91 kg). Capacity: 2 tons (1,814 kg). Includes one each: Small Flat Nose Hook Small Round Nose Hook Large Flat Nose Hook Large Round Nose Hook
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Eastwood MIG Welder Stud Weld Welding Kit with Dent Puller Slide Hammer
The Eastwood MIG Stud Welding Kit transforms your MIG welder into a Stud Welder which can be used to repair and remove dents from sheet metal. This kit includes everything you will need to start repairing dents with your MIG welder. The nozzle included in this kit was designed to work with Tweco style nozzles and may or may not work with other style MIG torches. Mig Welder is not included.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Eastwood Master MIG Welder Spot Weld & Stud Welding Dent Puller Accessory Kit
Orange Anodized Aluminum Tap Down with a Plastic Screw-on Tip
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Used for the hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull, break tack weld with a grinding cut-off wheel or cutting torch. It's easy to use and handy to have!
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
SS17000 Features: -Hold the door open while you hammer, pull, grind, sand or paint.-For door and deck lids.-Hold solid.-Fits any size latch .-Door Jammer. Warranty: -90 day warranty on material and workmanship.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
Repair dents and creases from the outside. Just drill a small hole in the bottom of the dent, then insert a pull rod, and easily work out the dent. No need to remove interior panel or upholstery. Designed for the professional with extra large vinyl covered handles for comfort. Handles are color coded: Green (straight) Red (bent)
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
SS21890 Features: -New Air Hammer driven door skinning tool that skins doors in less than 10 minutes using Skin Zipper’s self lubricating reinforced Nylon head that will crimp regular or adhesive bonded skins.-The Skin Zipper head will skin approximately 10 door skins and is easy to replace when it wears out.-Skin Zipper Door Skinning Tool. Includes: -Saves the technician arm fatigue and up to 60 minutes of labor and assembly time by easily skinning the door with minimal refinish required to paint and/or reapply e-coating Skin a door in less than 10 minutes! Step One allows the technician to form the edge of the door skin to an initial 45° angle by holding the tool at a right angle to the door. No hammer and dolly work required here. Step Two allows the technician to complete the final form by using the tool at a 45° angle. Two side slot widths are included for thick or thin sheet metal skins. When completed minimal finishing may be required on the corners and body lines.. Color/Finish: -The Skin Zipper crimps the edge tightly for a professional finish with no damage to the skin in an easy two step process.-Skin Zipper reduces technician arm fatigue from hammer and dolly method as well as door refinishing time. Warranty: -90 day warranty on material and workmanship.
For more details, please click the link below to check product price, shipping options, discounts, and special offers available.
